Product details

Technical parameters

Water connection from the back using the angle valveG3/8 "
Functional range of water pressure0,15 – 1,6 MPa
Recommended range of water pressure0,3 – 0,5 MPa
Big flush2 – 9 l
Small flush2 – 9 l
Factory setting of large flush6 l
Factory setting of small flush3 l
Hygienic reserve3 l
Water volume in the cistern9 l
Load test for the load capacity of WC bowl400 kg
Operational load of handles200 kg
Power supply 100–240 V AC, 50/60 Hz, 2500 mA


  • For wall-hung WC
  • For height adjustment of the WC bowl in range up to 300 mm
  • For mounting in front of a support wall or into a plasterboard construction – for people with reduced mobility (e.g. after surgery)
  • For installation on finished floor
  • For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm


  • Frame construction for dry installation in front of a support wall with a stainless steel cover panel
  • The installed system is covered with a stainless steel cover panel AISI 316L and there is no need for any additional fixing or anchor elements.
  • Electric linear drive – actuator that allows to adjust the height of the WC bowl in the range of 300 mm
  • Folding handles with electronic control panel that allows for dual flushing and height adjustment of the toilet bowl
  • Dual flush independently adjustable with hygienic reserve
  • The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • Wall mounting with adjustable depth in range 276– 326 mm
  • Frame material: powder-coated metal
  • 39229000
Quantity (package) 1 pc
Quantity (pallet) 1 pc
Dimensions (piece) 1686×835×654 mm
Dimensions (package) 1686×835×654 mm
Weight (piece) 191,06 kg
Weight (package) 191,06 kg
Weight (pallet) 211,1 kg

    Scope of supply

  • Cistern with fill and flush valve
  • Self-supporting frame
  • Cover panel made of resistant stainless steel AISI 316L (1.4404)
  • Electric linear drive – actuator
  • Two folding handles with electric linear drive
  • Fixation set: screw Ø8×60 – 60 pcs, dowel Ø12 – 6 pcs, washer – 6 pcs
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Elbow waste connector HT 90/110 polyethylene, PE-HD
  • Inlet seal, polypropylene outlet, wrapping seal, installation cover
  • Waste sealing, polypropylene connector, connector sealing, installation cap
  • Flexible connection to waste
M0005-ND Water supply ring A100
M0023-ND Wrapping seal 45×58×25 (WC modules)
M0615-ND Holder lock
Product codeEANTechnical sheet
AM101/1500L8595580554828Technický list