Pre-wall installation system for building into solid walls with top or front actuation

AM119/850 Renovmodul

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 1,6 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
Factory setting of large flush	6 l
Factory setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg

For wall-hung WC
For walling in and around the bearing wall – wet process
Suitable for reconstruction
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Dispenser for WC cistern tablets included
Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
Angle valve with the ability to connect to the Mepla piping system
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
Galvanized support structure with four hinged brackets for easy installation
The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Removable piece of polystyrene allows for easy access during installation
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Possibility of built-in remote flushing
Possibility of mounting in front of the wall
Compatible with all ALCA flush plates except for sensor flush plates,STRIPE and NIGHT LIGHT
The cistern is made of one piece, thus ensuring 100% impermeability
Water supply from rear / top / left / right
Maintenance work without using any tools
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation height 862 mm
Installation depth adjustable from 20–95 mm
Installation depth 170 mm
Material support brackets: galvanized metal

Cistern with fill and flush valve
Galvanized frame including supporting structure
Threading 1/2" for water connection with an integrated angle valve 1/2"–3/8"
Fixation set: screw Ø8×60 dowel – 4 pcs, dowel Ø12 – 4 pcs, combi screw M10 – 2 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Set for inserting toilet tablets

M0005-ND	Water supply ring A100
M0017C-ND	Inlet fill valve bracket
M0021-ND	Inlet sealing (WC systems)
M0023-ND	Rubber pipe sealing 45×58×25 (WC systems)
M0026-ND	Waste sealing (WC systems)
M0028-ND	Coupler sealing (WC systems)
M0043B-ND	Inner board for WC systems
M0046-ND	Console pipe
M0080-ND	Sleeve cover for WC systems
M0243-ND	Nut for angle valve bracket
M903-ND	Threaded rods + accessories
M955-ND	Set for changing mechanism screwes AM
M956-ND	Sliding waste pipe holder for WC systems
M959-ND	Set for exchange of inlet fill valve
MN0091-ND	Frame sleeve for WC systems
MN0092C-ND	Frame for WC system sleeve
MN0115-ND	Pipe with O-ring for WC systems
MN0536-ND	Service opening cover for AM118, AM119
MN0537A-ND	AM118, AM119 – mechanism
P165-ND	Angle valve with bracket and nut
P211-ND	Shut valve Schell replacement kit

File Name	Size	Action
AM119/850 Renovmodul - CAD drawing.dwg	540.13 kB	Download
AM119/850 Renovmodul - CAD drawing.dxf	1.47 MB	Download
AM119/850 Renovmodul - Installation instructions.pdf	2.63 MB	Download
AM119/850 Renovmodul - Declaration of performance.pdf	215.76 kB	Download
AM119/850 Renovmodul - Certificate.pdf	278.67 kB	Download
AM119/850 Renovmodul - Service Instructions for Alca Concealed Cistern.pdf	9.42 MB	Download