| Water connection from the back or top via mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 1,6 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 6 – 9 l |
| Small flush | 2,5 – 3,5 l |
| Factory setting of large flush | 6 l |
| Factory setting of small flush | 3 l |
| Hygienic reserve | 3 l |
| Water volume in the cistern | 9 l |
| Load test | 400 kg |
Pre-wall installation system for dry build up (self-supporting)
AM116/1120 Solomodul
Product details
- For wall-hung WC
- For mounting into plasterboard construction
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
- Dispenser for WC cistern tablets included
- Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
- Visible marks for both leveling and the centerline
- Sliding rail holder for the waste connector can be set to eight positions between 0–45 mm
- Angle valve with the ability to connect to the Mepla piping system
- The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Cistern hinges made of two-component material insulate the transmission of vibrations from buildings
- Possibility of tilting the cistern for easy installation in wooden construction buildings or mobile cells
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all ALCA flush plates
- Maintenance work without using any tools
- Water supply from rear / top / left / right
- The cistern is made of one piece, thus ensuring 100% impermeability
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Installation depth adjustable from 20–95 mm
- Installation depth 200 mm
- Frame material: powder-coated metal
- EN 14124, EN 14055
| Quantity (package) | 1 pc |
| Quantity (pallet) | 12 pcs |
| Dimensions (piece) | 1195×220×525 mm |
| Dimensions (package) | 1195×525×220 mm |
| Weight (piece) | 20,8917 kg |
| Weight (package) | 20,8917 kg |
| Weight (pallet) | 270,7004 kg |
- Cistern with fill and flush valve
- Self-supporting frame
- Threading 1/2" for water connection with an integrated angle valve 1/2"–3/8"
- Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- The 2 piece cover of the service opening is simply adjustable
- Set for inserting toilet tablets
| M0005-ND | Water supply ring A100 |
| M0017C-ND | Inlet fill valve bracket |
| M0021-ND | Inlet sealing (WC systems) |
| M0023-ND | Wrapping seal 45×58×25 (WC systems) |
| M0026-ND | Waste sealing (WC systems) |
| M0028-ND | Coupler sealing (WC systems) |
| M0080-ND | Sleeve cover for WC systems |
| M0243-ND | Nut for angle valve bracket |
| M903-ND | Threaded rods + accessories |
| M954-ND | Mechanism complete for WC systems |
| M956-ND | Sliding waste pipe holder for WC systems |
| M959-ND | Set for exchange of inlet fill valve |
| MN0091-ND | Frame sleeve for WC systems |
| MN0092C-ND | Frame for WC system sleeve |
| MN0115-ND | Pipe with O-ring for WC systems |
| MN0867-ND | Inner plate for WC tablet dispenser |
| P165-ND | Angle valve with bracket and nut |
| P175-ND | WC cistern hinges – complete 2 pcs |
| P176-ND | Tablet ejector and insert - set |
| P211-ND | Shut valve Schell replacement kit |
Downloads
| File Name | Size | Action | |
| AM116/1120 Solomodul - Service Instructions for Alca Concealed Cistern.pdf | 9.42 MB |
Download
|
|
| AM116/1120 Solomodul - Installation instructions.pdf | 1.86 MB |
Download
|
|
| AM116/1120 Solomodul - Declaration of performance.pdf | 214.1 kB |
Download
|
|
| AM116/1120 Solomodul - Certificate.pdf | 259.53 kB |
Download
|
|
| AM116/1120 Solomodul - CAD drawing.dwg | 835.01 kB |
Download
|
|
| AM116/1120 Solomodul - CAD drawing.dxf | 2.48 MB |
Download
|
Maintenance of pre-wall installation systems 2020–
Maintenance of pre-wall installation systems 2017–2020
Maintenance of pre-wall installation systems 2005–2017