Mounting frame with cistern for a waste sink with waste connection DN90/110 and faucet

A108F/1100

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 0,8 MPa
Recommended range of water pressure	0,3 – 0,6 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
Factory setting of large flush	6 l
Factory setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg

For mounting wall fittings
For a wall-hung waste sink with a spacing of anchor bolts up to 420 mm and waste connection Ø90/110
For mounting in front of a support wall or in to a plasterboard construction

For leading Wall Fittings
Built-in tanks allows for rinsing the waste sink
Height adjustable partitions
Swivel rail for attaching wall fittings with a pitch of 65–150 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Dual flush independently adjustable with hygienic reserve
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Adjustable telescopic feet, range 0–200 mm
Installation depth adjustable from 20–95 mm
Mounting depth 125 mm, with waste elbow 160 mm
Material: powder-coated metal

Cistern with fill and flush valve
Self-supporting frame
Threading 1/2" for water connection with an integrated angle valve 1/2"–3/8"
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Connection fittings G1/2"–G1/2"
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Waste elbow HT 90/110 with a seal
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
The 2 piece cover of the service opening is simply adjustable

A681	Waste sink grid
M0005-ND	Water supply ring A100
M0017C-ND	Inlet fill valve bracket
M0021-ND	Inlet sealing (WC systems)
M0023-ND	Rubber pipe sealing 45×58×25 (WC systems)
M0026-ND	Waste sealing (WC systems)
M0028-ND	Coupler sealing (WC systems)
M0043B-ND	Inner board for WC systems
M0080-ND	Sleeve cover for WC systems
M0243-ND	Nut for angle valve bracket
M0700-ND	Reduction G3/4"–G1/2"
M1522A-ND	Reduction G3/4"–G1/2" – short
M903-ND	Threaded rods + accessories
M9031-ND	Reduction – set
M954-ND	Mechanism complete for WC systems
M956-ND	Sliding waste pipe holder for WC systems
M959-ND	Set for exchange of inlet fill valve
M967-ND	Wall mounting kit for AM101
MN0091-ND	Frame sleeve for WC systems
MN0092C-ND	Frame for WC system sleeve
MN0115-ND	Pipe with O-ring for WC systems
P165-ND	Angle valve with bracket and nut
P175-ND	WC cistern hinges – complete 2 pcs
P211-ND	Shut valve Schell replacement kit

File Name	Size	Action
A108F/1100 - Declaration of conformity.pdf	283.95 kB	Download
A108F/1100 - Declaration of performance.pdf	214.1 kB	Download
A108F/1100 - Certificate.pdf	1.12 MB	Download
A108F/1100 - Installation instructions.pdf	5.74 MB	Download
A108F/1100 - CAD drawing.dwg	459.97 kB	Download
A108F/1100 - CAD drawing.dxf	1.62 MB	Download

	Product code	EAN	Technical sheet
	A108F/1100	8595580542139