Pre-wall installation system with integrated hygienic pipe flushing function
AM121/1120
Ideální pro instalaci závěsného WC, AM121/1120 nabízí adaptabilní kotvící nohy pro stabilní montáž, obsahuje dávkovač wc tablet, a speciální funkce jako nosný prvek pro závěsná wc s integrovanou nádrží pro proplach. Kompatibilita s ovládacími tlačítky Alca umožňuje snadnou personalizaci, což činí tento modul vhodným pro moderní koupelny.
Product details
| Water connection from the top using mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 1,0 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 6 – 9 l |
| Small flush | 2,5 – 3,5 l |
| Factory setting of large flush | 6 l |
| Factory setting of small flush | 3 l |
| Hygienic reserve | 3 l |
| Water volume in the cistern | 9 l |
| Load test | 400 kg |
| Possibility of automatic rinsing of water pipes by cold and hot water |
- Support element for wall-hung toilets with integrated flushing cistern
- For mounting in front of a support wall or in to a plasterboard construction
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
- For automatic rinsing of hot and cold water supply
Application
- Dispenser for WC cistern tablets included
- Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
- Visible marks for both leveling and the centerline
- Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
- Angle valve compatible with Mepla piping system for cold water
- Angle valve compatible with Mepla piping system for hot water
- Double solenoid valve with control electronics and water level monitoring sensor
- The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Cistern hinges made of two-component material insulate the transmission of vibrations from buildings
- Possibility of tilting the cistern for easy installation in wooden construction buildings or mobile cells
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all ALCA flush plates
- Maintenance work without using any tools
- Water supply from the rear/top
- The cistern is made of one piece, thus ensuring 100% impermeability
- Installation depth adjustable from 20–95 mm
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Frame material: powder-coated metal
- Installation depth 125 mm
- Powered by the main electric supply, the power source must be purchased (12 V DC min 1 A) – recommended AEZ310
- The malfunctioning of automatic flushing system is signalized by LED control (on the electronics inside the cistern)
- Possibility to set the time for activating the automatic rinsing
- Possibility to set the duration of automatic rinsing
- Possibility to adjust the volume of the audio alarm in case of a malfunction of the automatic flushing system
- The device for signaling the error status can be connected to MAR central control unit of the building
- If the toilet bowl is not flushed for 72 hours, the flushing system is automatically activated. The factory setting for activating the flush cycle is 72 hours and can be changed using the remote control.
- The flush cycle time is preset to 1 min warm water rinse and 1 min cold water rinse. The flush cycle time can be changed using the remote control.
Specifications
Norms
EN 14124, EN 14055
- 39229000
| Quantity (package) | 1 pc |
| Quantity (pallet) | 20 pcs |
| Dimensions (piece) | 1130×145×520 mm |
| Dimensions (package) | 1130×520×145 mm |
| Weight (piece) | 13,8879 kg |
| Weight (package) | 13,8879 kg |
| Weight (pallet) | 280,0060 kg |
- Cistern with fill and flush valve
- Self-supporting frame
- Two angle valves Schell 1/2"–3/8"
- Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- The 2 piece cover of the service opening is simply adjustable
- Set for inserting toilet tablets
- control electronics with integrated water level sensor
- Electronics holder
- Solenoid valves
- The remote control is not part of the package - it can be purchased as an optional accessory
Scope of supply
Downloads
| Product code | EAN | Technical sheet | ||
|---|---|---|---|---|
| AM121/1120 | 8595580579197 |  |
AM121/1120 - Installation instructions.pdf 
