| Water connection from the back or top via mounting holes | G1/2 " | 
| Functional range of water pressure | 0,05 – 1,6 MPa | 
| Recommended range of water pressure | 0,3 – 0,5 MPa | 
| Big flush | 6 – 9 l | 
| Small flush | 2,5 – 3,5 l | 
| Factory setting of large flush | 6 l | 
| Factory setting of small flush | 3 l | 
| Hygienic reserve | 3 l | 
| Water volume in the cistern | 9 l | 
| Load test | 400 kg | 
                        Pre-wall installation system for dry build up (self-supporting)
                        
                                                    
                                                
                    
                AM116/1120 Solomodul
Product details
- For wall-hung WC
 - For mounting into plasterboard construction
 - For floor thickness 0–200 mm
 - For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
 
- Dispenser for WC cistern tablets included
 - Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
 - Visible marks for both leveling and the centerline
 - Sliding rail holder for the waste connector can be set to eight positions between 0–45 mm
 - Angle valve with the ability to connect to the Mepla piping system
 - The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
 - The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
 - The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
 - Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
 - Cistern hinges made of two-component material insulate the transmission of vibrations from buildings
 - Possibility of tilting the cistern for easy installation in wooden construction buildings or mobile cells
 - Dual flush independently adjustable with hygienic reserve
 - Suitable for installation of remote or sensor flushing
 - Compatible with all ALCA flush plates
 - Maintenance work without using any tools
 - Water supply from rear / top / left / right
 - The cistern is made of one piece, thus ensuring 100% impermeability
 - The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
 - Installation depth adjustable from 20–95 mm
 - Installation depth 200 mm
 - Frame material: powder-coated metal
 
- EN 14124, EN 14055
 
| Quantity (package) | 1 pc | 
| Quantity (pallet) | 12 pcs | 
| Dimensions (piece) | 1195×220×525 mm | 
| Dimensions (package) | 1195×525×220 mm | 
| Weight (piece) | 20,8917 kg | 
| Weight (package) | 20,8917 kg | 
| Weight (pallet) | 270,7004 kg | 
- Cistern with fill and flush valve
 - Self-supporting frame
 - Threading 1/2" for water connection with an integrated angle valve 1/2"–3/8"
 - Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
 - Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
 - Elbow waste connector HT 90/90 polyethylene, PE-HD
 - Waste reduction HT 90/110 polyethylene, PE-HD
 - Inlet seal, PP outlet, wrapping seal
 - Drainage seal, PP connector, connector seal
 - End-caps set for protecting the connecting holes during installation of the system
 - The 2 piece cover of the service opening is simply adjustable
 - Set for inserting toilet tablets
 
| M0005-ND | Water supply ring A100 | 
| M0017C-ND | Inlet fill valve bracket | 
| M0021-ND | Inlet sealing (WC systems) | 
| M0023-ND | Rubber pipe sealing 45×58×25 (WC systems) | 
| M0026-ND | Waste sealing (WC systems) | 
| M0028-ND | Coupler sealing (WC systems) | 
| M0080-ND | Sleeve cover for WC systems | 
| M0243-ND | Nut for angle valve bracket | 
| M903-ND | Threaded rods + accessories | 
| M954-ND | Mechanism complete for WC systems | 
| M956-ND | Sliding waste pipe holder for WC systems | 
| M959-ND | Set for exchange of inlet fill valve | 
| MN0091-ND | Frame sleeve for WC systems | 
| MN0092C-ND | Frame for WC system sleeve | 
| MN0115-ND | Pipe with O-ring for WC systems | 
| MN0867-ND | Inner plate for WC tablet dispenser | 
| P165-ND | Angle valve with bracket and nut | 
| P175-ND | WC cistern hinges – complete 2 pcs | 
| P176-ND | Tablet ejector and insert - set | 
| P211-ND | Shut valve Schell replacement kit | 
Downloads
| File Name | Size | Action | |
| AM116/1120 Solomodul - Service Instructions for Alca Concealed Cistern.pdf | 9.42 MB | 
                            
                                Download
                                 | 
                    |
| AM116/1120 Solomodul - Installation instructions.pdf | 1.86 MB | 
                            
                                Download
                                 | 
                    |
| AM116/1120 Solomodul - Declaration of performance.pdf | 214.1 kB | 
                            
                                Download
                                 | 
                    |
| AM116/1120 Solomodul - Certificate.pdf | 259.53 kB | 
                            
                                Download
                                 | 
                    |
| AM116/1120 Solomodul - CAD drawing.dwg | 835.01 kB | 
                            
                                Download
                                 | 
                    |
| AM116/1120 Solomodul - CAD drawing.dxf | 2.48 MB | 
                            
                                Download
                                 | 
                    
                        
                    
                        Maintenance of pre-wall installation systems 2020–                    
                
                        
                    
                        Maintenance of pre-wall installation systems 2017–2020                    
                
                        
                    
                        Maintenance of pre-wall installation systems 2005–2017