Pre-wall installation system Ecology for building into solid walls

AM115/1000E Renovmodul

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 1,6 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	3,5 – 6 l
Small flush	2 – 4 l
Factory setting of large flush	4 l
Factory setting of small flush	2 l
Hygienic reserve	2 l
Water volume in the cistern	6 l
Load test	400 kg

For wall-hung WC with flushing volume of 2/4 l
For walling in and around the bearing wall – wet process
Suitable for reconstruction
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Dispenser for WC cistern tablets included
Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
Angle valve with the ability to connect to the Mepla piping system
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
Galvanized support structure with four hinged brackets for easy installation
The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Removable piece of polystyrene allows for easy access during installation
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Water-saving flushing: 2 l small flush, 4 l large flush
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
The cistern is made of one piece, thus ensuring 100% impermeability
Water supply from rear / top / left / right
Maintenance work without using any tools
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting height 1062 mm
Installation depth adjustable from 20–95 mm
Installation depth 125 mm
Material of the load bearing structure: galvanized metal

Cistern with fill and flush valve
Galvanized frame including supporting structure
Threading 1/2" for water connection with an integrated angle valve 1/2"–3/8"
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Set for inserting toilet tablets

M0005-ND	Water supply ring A100
M0017C-ND	Inlet fill valve bracket
M0021-ND	Inlet sealing (WC systems)
M0023-ND	Wrapping seal 45×58×25 (WC systems)
M0026-ND	Waste sealing (WC systems)
M0028-ND	Coupler sealing (WC systems)
M0046-ND	Console pipe
M0080-ND	Sleeve cover for WC systems
M0243-ND	Nut for angle valve bracket
M903-ND	Threaded rods + accessories
M954-ND	Mechanism complete for WC systems
M956-ND	Sliding waste pipe holder for WC systems
M959-ND	Set for exchange of inlet fill valve
MN0091-ND	Frame sleeve for WC systems
MN0092C-ND	Frame for WC system sleeve
MN0115-ND	Pipe with O-ring for WC systems
MN0867-ND	Inner plate for WC tablet dispenser
P176-ND	Tablet ejector and insert - set

File Name	Size	Action
AM115/1000E Renovmodul - Service Instructions for Alca Concealed Cistern.pdf	9.42 MB	Download
AM115/1000E Renovmodul - CAD drawing.dwg	921.2 kB	Download
AM115/1000E Renovmodul - CAD drawing.dxf	2.6 MB	Download
AM115/1000E Renovmodul - Installation instructions.pdf	10.26 MB	Download
AM115/1000E Renovmodul - Declaration of performance.pdf	140.23 kB	Download
AM115/1000E Renovmodul - Certificate.pdf	736.59 kB	Download