| Odour trap | 28 mm | 
| Flow rate | 35 l/min | 
| Resistance of odour trap against the pressure | 575 Pa | 
| Waste pipe diameter | 40 mm | 
| Minimum thickness of concrete | 65 mm | 
| Total installation height | 80 – 106 mm | 
| Load class K3 | 300 kg | 
Product details
- For indoor use
 - For drainage of floor-level showers
 - For installation into open spaces or near the wall of the shower area
 - For solid grids, FLOOR for embedding tiles and two-sided grid SWITCH
 - For wheelchair access
 - For sites with limited floor height
 
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
 - For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
 - Installation height from 65 mm
 - Adjustable height
 - Trap firmly connected to the drain – 100% waterproofing
 - Self-adhesive tape for quality waterproofing
 - Mechanically cleanable trap up to the waste pipe
 - The collar and trap are protected by foil, and the channel itself by a polystyrene insert
 - The high flow rate is achieved due to the double compartment trap system
 - 25 years guarantee
 - Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
 - Trap material: polypropylene
 
| Quantity (package) | 8 pcs | 
| Quantity (pallet) | 24 pcs | 
| Dimensions (piece) | 385×130×175 mm | 
| Weight (piece) | 2,0008 kg | 
| Weight (package) | 16,0064 kg | 
| Weight (pallet) | 68,0192 kg | 
- The shower drain is assembled with the odour trap
 - Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
 - Self-adhesive waterproofing tape
 - Protective foil covering for the drain edges and odour trap
 - Protective film for trap inlet
 - Installation trough cover - polystyrene
 
| S0529-ND | Strainer SPZ | 
| S0536-ND | O-ring 75×2,5 | 
| S0663-ND | Odour trap SPZ low | 
| SPZ03-ND | Trap for shower drain low, side |