| Odour trap | 50 mm |
| Flow rate | 48,6 l/min |
| Overflow flow rate | 33,6 l/min |
| Resistance of odour trap against the pressure | 588 Pa |
| Thermal resistance | 95 ˚C |
Product details
- For filling the bath by overflow
- To drain the water from the bath to the waste
- For whirlpool baths
- For bathtubs with drain outlet Ø52 mm
- A part of the bath waste and trap is a mechanism, that when you open the drain outlet concurrently the valves open, so that can easily drain the residual water from the whirlpool bathtub
- Compatible with most whirlpool and pearl systems
- For connection serve two outlets – standard elbow
- Aerator Neoperl – easy access and exchange
- Control shaft made of stainless steel
- Water does not flow down on the side of the bathtub and does not leave marks
- Space-saving design in the bathtub – visible only control knob
- Wet odour trap with swivel elbow
- Closing waste by pop-up mechanism
- Overflow flexi pipe
- Side G1/2" fitting for filling of pre-mixed water
- The length of the bathtub trap 57 cm
- EN 274
| Quantity (package) | 12 pcs |
| Quantity (pallet) | 192 pcs |
| Dimensions (piece) | 380×95×210 mm |
| Dimensions (package) | 590×430×390 mm |
| Weight (piece) | 1,0674 kg |
| Weight (package) | 12,8088 kg |
| Weight (pallet) | 224,9408 kg |
- Bath overflow filler, waste and trap system
- Waste and trap body with overflow filler, overflow and discharge mechanism for HMS
- Screw fittings with a quick connector to HMS 2 pcs
- Chrome-plated metal control knob
- Chrome-plated metal plug
- Chrome-plated brass outlet grid
- Odour trap of polypropylene, thermally and chemically resistant, longitudinally welded
- Assembly kit
- Profiled seal
| P0039B-ND | Large plug (A51CRM, A564CRM1, A565CRM1) |
| P064-ND | Plug metal large (A564KM1, A565KM1) |
| P069-ND | Aerator set |
| P078-ND | Control knob A565 |
| P079-ND | Aerator set long |
| P084-ND | Control knob bath trap metal A564 |
| P094-ND | Set of push-in drainage A566 |
| S0003-ND | Nut G1 1/4" |
| S0004-ND | Nut G1 1/2" |
| S0009-ND | Conical sealing 44×39×5 |
| S0069-ND | Lever A51 |
| S0074-ND | Overflow grid A51–A56 |
| S0082-ND | Bathtub plug sealing |
| S0100-ND | Shaped sealing |
| S0160-ND | Screw 33 mm long |
| S0237-ND | Grid A55 metal |
| S0316-ND | Screw 40 mm long |
| S0788-ND | Overflow sealing A564 |
| S0918-ND | Hydromassage bracket |
| S0952-ND | O-ring 12.0×2 |
| S0965-ND | Bathtub plug sealing |
| S0975-ND | O-ring 10/2 |
| V0023-ND | Conical sealing 56×49×6 |
Downloads
| Product code | EAN | Technical sheet | ||
|---|---|---|---|---|
| A566-273133-57 | 8595580536251 |  | ||
| A566-273133-80 | 8595580541156 | | ||
| A566-273133-100 | 8595580541163 | | ||
| A566-273133-120 | 8595580541170 | |