| Odour trap | 50 mm |
| Flow rate | 48,6 l/min |
| Overflow flow rate | 33,6 l/min |
| Resistance of odour trap against the pressure | 588 Pa |
| Thermal resistance | 95 ˚C |
Product details
- For filling the bath by overflow
- To drain the water from the bath to the waste
- For standard size bathtubs
- For bathtubs with drain outlet Ø52 mm
- Bath overflow filler, waste and trap system
- Aerator Neoperl – easy access and exchange
- Control shaft made of stainless steel
- Water does not flow down on the side of the bathtub and does not leave marks
- Space-saving design in the bathtub – only control knob visible
- Easy installation with three stainless steel screws
- Wet odour trap with swivel elbow
- Closing waste by pop-up mechanism
- Overflow flexi pipe
- Side G1/2" fitting for filling of pre-mixed water
- The length of the bathtub trap 57 cm
- EN 274
| Quantity (package) | 12 pcs |
| Quantity (pallet) | 192 pcs |
| Dimensions (piece) | 380×95×210 mm |
| Dimensions (package) | 595×435×395 mm |
| Weight (piece) | 0,8993 kg |
| Weight (package) | 10,7916 kg |
| Weight (pallet) | 192,6656 kg |
- Waste and trap body with overflow
- Chrome-plated plastic control knob
- Chrome-plated plastic plug
- Chrome-plated brass outlet grid
- Odour trap of polypropylene, thermally and chemically resistant, longitudinally welded
- Assembly kit
- Profiled seal
| P0039B-ND | Large plug (A51CRM, A564CRM1, A565CRM1) |
| P064-ND | Plug metal large (A564KM1, A565KM1) |
| P069-ND | Aerator set |
| P070-ND | Control knob A564 |
| P079-ND | Aerator set long |
| S0003-ND | Nut G1 1/4" |
| S0004-ND | Nut G1 1/2" |
| S0009-ND | Conical sealing 44×39×5 |
| S0079-ND | Nut |
| S0082-ND | Bathtub plug sealing |
| S0084-ND | O-ring 10×2 |
| S0100-ND | Shaped sealing |
| S0103-ND | Chrome grid |
| S0160-ND | Screw 33 mm long |
| S0237-ND | Grid A55 metal |
| S0751-ND | Bathtub siphon insert |
| S0788-ND | Overflow sealing A564 |
| S0965-ND | Bathtub plug sealing |